833407a

Package: python3-xgrammar
Description-md5: 0e2c00ca88d9ed8b4a9b67ca683f3709
Description-en: Efficient, Flexible and Portable Structured Generation
 XGrammar is an open-source library for efficient, flexible,
 and portable structured generation. It supports general
 context-free grammar to enable a broad range of structures
 while bringing careful system optimizations to enable fast
 executions. XGrammar features a minimal and portable C++ backend
 that can be easily integrated into multiple environments and
 frameworks, and is co-designed with the LLM inference engine
 and enables zero-overhead structured generation in LLM inference.
.
795100a

Package: libtrantor-doc
Description-md5: d2cfe7f2ebb8ea5023ea0162c0e83bc9
Description-en: Non-blocking I/O cross-platform TCP network library documentation files
 Trantor is a non-blocking I/O cross-platform TCP network library, using C++14.
 Drawing on the design of Muduo Library
 .
 This package provides the documentation files for the trantor library
.
776241a

Package: qphotorec
Description-md5: fc2b5c97e5afaa9fc59c56e198162b31
Description-en: graphical interface for the PhotoRec file recovery tool
 QPhotoRec is a Qt-based graphical user interface for PhotoRec, the file
 data recovery software designed to recover lost files from digital
 camera memory, hard disks and other media.
 .
 It provides the same recovery capabilities as the command line PhotoRec
 tool in a point-and-click interface.

Package: testdisk
Description-md5: c0e7e70f0dc09ddbafa65989b223c157
Description-en: Partition scanner and disk recovery tool
 TestDisk checks the partition and boot sectors of your disks.
 It is very useful in forensics, recovering lost partitions.
 It works with :
  * DOS/Windows FAT12, FAT16 and FAT32
  * NTFS ( Windows NT/2K/XP )
  * Linux Ext2 and Ext3
  * BeFS ( BeOS )
  * BSD disklabel ( FreeBSD/OpenBSD/NetBSD )
  * CramFS (Compressed File System)
  * HFS and HFS+, Hierarchical File System
  * JFS, IBM's Journaled File System
  * Linux Raid
  * Linux Swap (versions 1 and 2)
  * LVM and LVM2, Linux Logical Volume Manager
  * Netware NSS
  * ReiserFS 3.5 and 3.6
  * Sun Solaris i386 disklabel
  * UFS and UFS2 (Sun/BSD/...)
  * XFS, SGI's Journaled File System
 .
 The companion file recovery tool PhotoRec is shipped in the photorec
 package, and its graphical interface in the qphotorec package.
.
776208,776211c
 This package also ships fidentify, which identifies file types by their
 signatures using the same database as PhotoRec.
 .
 PhotoRec searches for the following files and is able to undelete them:
.
776185,776206c
Package: photorec
Description-md5: 1873018002d8575916afd901e2252118
Description-en: file recovery tool
 PhotoRec is file data recovery software designed to recover lost
 pictures from digital camera memory or even hard disks. It has been
 extended to search also for non audio/video headers.
.
728813a
Package: librust-zcheapstr-dev
Description-md5: 577d551205f9c867914236ee54d1c3cf
Description-en: Cheaply cloneable immutable string type - Rust source code
 Source code for Debianized Rust crate "zcheapstr"

.
727076a

Package: librust-unicode-reverse-dev
Description-md5: b9e6d654ffe4f92553a981dd71847005
Description-en: Unicode-aware in-place string reversal - Rust source code
 This crate reverses text by extended grapheme cluster instead of by byte or
 Unicode scalar value. This keeps combining marks attached to their base
 characters and treats multi-code-point emoji sequences as units.
 .
 The operation is performed in place without heap allocation, and the crate can
 be used in no_std environments.
 Source code for Debianized Rust crate "unicode-reverse"
.
726465a

Package: librust-trippy-tui-dev
Description-md5: d875d913fac186510a2bcaa69d4eec4d
Description-en: Network diagnostic tool - Rust source code
 Source code for Debianized Rust crate "trippy-tui"
.
726460a

Package: librust-trippy-core-dev
Description-md5: 8827137ef9b16470511b11e889f0c0fc
Description-en: Network tracing library - Rust source code
 Source code for Debianized Rust crate "trippy-core"

Package: librust-trippy-dns-dev
Description-md5: b3b21fd3a0af9df7f98f204668c5a329
Description-en: Lazy DNS resolver for Trippy - Rust source code
 Source code for Debianized Rust crate "trippy-dns"

Package: librust-trippy-packet-dev
Description-md5: a739ba066f22f15e63fb5f0813cc3081
Description-en: Network packets for Trippy - Rust source code
 Source code for Debianized Rust crate "trippy-packet"
.
725014a
Package: librust-syn-2-dev
Description-md5: 1ffe117b5cb4e32c6a0cdcf3ccac7f54
Description-en: Parser for Rust source code - Rust source code
 Source code for Debianized Rust crate "syn"

.
724974,724979d
724948a
Package: librust-symphonia-common-dev
Description-md5: 1524a10926653b4b35196700f7e8e4e2
Description-en: Project Symphonia utilities for codecs and formats - Rust source code
 Source code for Debianized Rust crate "symphonia-common"

.
724196a

Package: librust-streaming-decompression-dev
Description-md5: 22dec1c287d1e4e0d4244cb00953be61
Description-en: Reusable-buffer abstraction for streaming decompression - Rust source code
 This crate provides a fallible streaming iterator that applies a decompression
 function provided by the caller while retaining and reusing an internal byte
 buffer.
 It is useful for readers of chunked compressed formats, where allocating a new
 output buffer for every item would be unnecessarily expensive.
 Source code for Debianized Rust crate "streaming-decompression"
.
723619a
Package: librust-snakecase-dev
Description-md5: e9dc766efb83d002cbf219778472a564
Description-en: ASCII and Unicode snake_case conversion - Rust source code
 Source code for Debianized Rust crate "snakecase"

.
723392a
Package: librust-similario-core-dev
Description-md5: 6d1591af739af08fcb21686c328318f7
Description-en: Library, that allows to find similar videos - Rust source code
 Source code for Debianized Rust crate "similario_core"

.
721332,721344c

Package: rsopv
Description-md5: 956c26f8ee09cab5e1dd5e883e4558f9
Description-en: Stateless OpenPGP Verification-only (SOPV) CLI (rpgp and rpgpie)
 rsopv offers a Rust-based implementation of the Stateless OpenPGP
 Command Line Interface's verification-only subset (also known as "sopv").
 .
 This standards-derived interface is an implementation of
 https://datatracker.ietf.org/doc/draft-dkg-openpgp-stateless-cli/,
 intended to be used in interoperability tests and simple OpenPGP
 commands, while leaving no trace in the filesystem.
 This package contains the following binaries built from the Rust crate
 "rsop":
.
721320,721328c
Description-md5: 54c5f2f288b6deef889b6f855828b540
Description-en: Stateless OpenPGP (SOP) CLI tool based on rPGP and rpgpie
 rsop offers a Rust-based implementation of the Stateless OpenPGP
 Command Line Interface.
 .
 This standards-derived interface is an implementation of
 https://datatracker.ietf.org/doc/draft-dkg-openpgp-stateless-cli/,
 intended to be used in interoperability tests and simple OpenPGP
 commands, while leaving no trace in the filesystem.
.
720609a
Package: librust-rename-item-dev
Description-md5: 712fc49fec3566fbfaac17f4f4853646
Description-en: Procedural macro to rename items on declaration, according to different case styles - Rust source code
 Source code for Debianized Rust crate "rename-item"

.
718331a

Package: librust-pfm-dev
Description-md5: 497d2ad6a05104a768585a2e005e8cd3
Description-en: High-level wrapper of libpfm4 - Rust source code
 Source code for Debianized Rust crate "pfm"
.
717596a
Package: librust-oxipng-dev
Description-md5: a4c4faefdce290b9f9d4ffdb44469025
Description-en: Lossless PNG compression optimizer - Rust source code
 Source code for Debianized Rust crate "oxipng"

.
716889a
Package: librust-now-dev
Description-md5: 2afae82435c8b884bfdef3e5c4fc5565
Description-en: Convenient calendar-boundary operations for chrono - Rust source code
 This crate extends chrono time zones and date-time values with methods for
 finding the beginning or end of a minute, hour, day, week, month, quarter, or
 year. It also supports selecting Monday or Sunday as the first day of a week
 and calculating a date's week number within its year.
 Source code for Debianized Rust crate "now"

.
716336a
Package: librust-murmur3-dev
Description-md5: cc650a1fa10e9cfb77ac7cef7ced7869
Description-en: Murmur3 hash - Rust source code
 Source code for Debianized Rust crate "murmur3"

.
715821a
Package: librust-md4-dev
Description-md5: e1b0a31f15b8eb79f49bffcf7cf87d91
Description-en: MD4 hash function - Rust source code
 Source code for Debianized Rust crate "md4"

.
714262a
Package: librust-lamxfs-dev
Description-md5: 7c7a57674a0cfe55972fee758ac1cecb
Description-en: no_std read-only XFS filesystem reader for UEFI bootloaders
 Source code for Debianized Rust crate "lamxfs"

.
713940a
Package: librust-jxl-grid-dev
Description-md5: 9b5024cd9592b327bc2cc5b875b6a0f8
Description-en: Sample grid implementation for jxl-oxide - Rust source code
 Source code for Debianized Rust crate "jxl-grid"

.
712462a

Package: hyperfine-scripts
Description-md5: 4801e48955b7a4e82b9632281b1d3ee7
Description-en: helper scripts for the hyperfine benchmarking tool
 These are the scripts shipped by hyperfine upstream to post-process the JSON
 files produced by "hyperfine --export-json": they plot the timing results in
 various ways and run some additional statistical analysis on them.
 .
 They are installed in /usr/bin, named after the upstream script they come
 from, with a "hyperfine-" prefix (e.g. hyperfine-plot-whisker).
.
707937a
Package: librust-digest-io-dev
Description-md5: 45097acfb2df4e22f05d35f885e8ed63
Description-en: I/O adapters for digest traits - Rust source code
 This crate bridges Rust's standard input/output traits and the generic hashing
 traits provided by the digest crate. It lets digest implementations receive
 bytes through std::io::Write, exposes extendable-output readers through
 std::io::Read, and provides reader and writer wrappers that calculate a digest
 while forwarding data.
 .
 These adapters make hash functions usable with generic streaming I/O routines,
 such as std::io::copy, without first buffering the complete input in memory.
 Source code for Debianized Rust crate "digest-io"

.
707487a
Package: librust-debug-unsafe-dev
Description-md5: dde905c578af605273774bb52935cc06
Description-en: Debug-checked wrappers for unchecked Rust operations - Rust source code
 This crate provides convenience traits for unwrapping Option values and
 accessing slices. In debug builds these operations retain their normal checks
 and panic when their preconditions are violated; optimized builds use unchecked
 variants to avoid the associated run-time cost.
 .
 An optional feature provides the same pattern for constructing fixed-capacity
 ArrayString values. The crate supports no_std environments.
 Source code for Debianized Rust crate "debug_unsafe"

.
706737a
Package: librust-cron-dev
Description-md5: f658af8ec8b823466b6b8d073e742442
Description-en: Cron expression parser and schedule explorer - Rust source code
 Source code for Debianized Rust crate "cron"

.
706351a
Package: librust-const-gen-dev
Description-md5: bbaf10754eb4bcf82a9cf754b1cf0897
Description-en: Generating (relatively) complex compile-time constants in rust - Rust source code
 Source code for Debianized Rust crate "const-gen"

Package: librust-const-gen-derive-dev
Description-md5: a6537ed4f6c673363ceab913d842a0c9
Description-en: Derive macro for the const-gen crate - Rust source code
 Source code for Debianized Rust crate "const-gen-derive"

.
704348a
Package: librust-blake2-0.10-dev
Description-md5: cbfe8e184bc7822c341acd9e84343c8d
Description-en: BLAKE2 hash functions - Rust source code
 Source code for Debianized Rust crate "blake2"

.
704347a

Package: librust-blake2-dev
Description-md5: cbfe8e184bc7822c341acd9e84343c8d
Description-en: BLAKE2 hash functions - Rust source code
 Source code for Debianized Rust crate "blake2"
.
704117a
Package: librust-bincode-1-dev
Description-md5: 21111e0f5a7127ca10d8970ae10a88f4
Description-en: Compact binary serialization / deserialization library - Rust source code
 Source code for Debianized Rust crate "bincode"

.
704112a
Description-md5: 21111e0f5a7127ca10d8970ae10a88f4
Description-en: Compact binary serialization / deserialization library - Rust source code
 Source code for Debianized Rust crate "bincode"

Package: librust-bincode-dev
.
703594a
Package: librust-atuin-vt100-dev
Description-md5: 2fbfdfcbb2fe27ffcf7202b82b4095a8
Description-en: Fork of https://crates.io/crates/vt100 - Rust source code
 Source code for Debianized Rust crate "atuin-vt100"

.
702937a
Package: librust-array-init-cursor-dev
Description-md5: 9a592825a8d3779e163559af969a7414
Description-en: Initialize fixed-size arrays one part at a time - Rust source code
 This crate helps Rust programs construct fixed-size arrays incrementally. It
 keeps track of the elements that remain to be written and detects if array
 construction ends before every element has been supplied.
 .
 The crate does not require the Rust standard library, making it suitable for
 embedded and other resource-constrained environments.
 Source code for Debianized Rust crate "array-init-cursor"

.
702917a
Package: librust-argon2-0.5-dev
Description-md5: 91023ae4d9d2286764a7c8a03667c179
Description-en: Pure Rust implementation of the Argon2 password hashing function with support for the Argon2d, Argon2i, and Argon2id algorithmic variants - Rust source code
 Source code for Debianized Rust crate "argon2"

.
701936c
Package: librulexdb2
.
677492,677496c
Description-md5: 3177bf66f5c6d862b999f16ab6594ee9
Description-en: Python module to create odt files from Python objects (Python3)
 This is a Python templating library to create odt files from Python objects.
.
669606a
Package: r-cran-rncl
Description-md5: f9ba02f5ffab17a353bbeb6c3a62529b
Description-en: Interface to the Nexus Class Library
 An interface to the Nexus Class Library which allows parsing of NEXUS, Newick
 and other phylogenetic tree file formats. It provides elements of the file
 that can be used to build phylogenetic objects such as ape's 'phylo'
 or phylobase's 'phylo4(d)'. This functionality is demonstrated
 with 'read_newick_phylo()' and 'read_nexus_phylo()'.

.
668164a
Package: r-cran-poolr
Description-md5: 6bd86e2b4cad1bcab6338519a0a84292
Description-en: Methods for Pooling P-Values from (Dependent) Tests
 Functions for pooling/combining the results (i.e., p-values) from (dependent)
 hypothesis tests. Included are Fisher's method, Stouffer's method,
 the inverse chi-square method, the Bonferroni method, Tippett's method,
 and the binomial test. Each method can be adjusted based on an estimate of
 the effective number of tests or using empirically derived null distribution
 using pseudo replicates. For Fisher's, Stouffer's, and the inverse chi-square
 method, direct generalizations based on multivariate theory are also available
 (leading to Brown's method, Strube's method, and the generalized inverse
 chi-square method). An introduction can be found in Cinar and Viechtbauer
 (2022) <doi:10.18637/jss.v101.i01>.

.
664962a
Package: r-cran-ggdist
Description-md5: 5818db953c948aec8d890276473a0d9f
Description-en: Visualizations of Distributions and Uncertainty
 Provides primitives for visualizing distributions using 'ggplot2' that are
 particularly tuned for visualizing uncertainty in either a frequentist or
 Bayesian mode. Both analytical distributions (such as frequentist confidence
 distributions or Bayesian priors) and distributions represented as samples
 (such as bootstrap distributions or Bayesian posterior samples) are
 easily visualized. Visualization primitives include but are not limited to:
 points with multiple uncertainty intervals, eye plots (Spiegelhalter D.,
 1999) <https://ideas.repec.org/a/bla/jorssa/v162y1999i1p45-58.html>,
 density plots, gradient plots, dot plots (Wilkinson L., 1999)
 <doi:10.1080/00031305.1999.10474474>, quantile dot plots (Kay M., Kola T.,
 Hullman J., Munson S., 2016) <doi:10.1145/2858036.2858558>, complementary
 cumulative distribution function barplots (Fernandes M., Walls L., Munson S.,
 Hullman J., Kay M., 2018) <doi:10.1145/3173574.3173718>, and fit curves with
 multiple uncertainty ribbons.

.
664298,664306c
Description-md5: 2e5bc3508dc48bf5d1237b0d7d736d7e
Description-en: Wrapper for 'FFTW3' Includes: One-Dimensional, Two-Dimensional, Three-Dimensional, and Multivariate Transforms
 Provides a wrapper for several 'FFTW' functions. This package provides access
 to the two-dimensional 'FFT', the multivariate 'FFT', and the one-dimensional
 real to complex 'FFT' using the 'FFTW3' library. The package includes the
 functions fftw() and mvfftw() which are designed to mimic the functionality
 of the R functions fft() and mvfft(). The 'FFT' functions have a parameter
 that allows them to not return the redundant complex conjugate when the input
 is real data.

.
650913,650914c
Description-md5: 16c54e5e1f27b7b1b6c450c5b8764bfa
Description-en: Qt5 Suru style for QtQuick Controls 2
 This is a style for QtQuickControls 2 providing a uniform look'n'feel
 for apps targetting the Lomiri Operatoring / Ubuntu Touch.
 .
 This QQC2 style explicitly uses the Suru icon theme for drawing its
 elements.

Package: qml6-module-qtquick-controls2-suru
Description-md5: 5d9af15ab048b5c88d50e305498bc2eb
Description-en: Qt6 Suru style for QtQuick Controls 2
.
649407,649439c
Package: libqgis-gui3.44.14
Description-md5: 2165ba9b4d7e41a03df30272ae0eefa8
Description-en: QGIS - shared gui library
 QGIS is a Geographic Information System (GIS) which manages, analyzes and
 display databases of geographic information.
 .
 This package contains the shared gui library.

Package: libqgis-native3.44.14
Description-md5: 8cdea1246871e92b3436eab7f993e31a
Description-en: QGIS - shared native gui library
 QGIS is a Geographic Information System (GIS) which manages, analyzes and
 display databases of geographic information.
 .
 This package contains the shared native gui library.

Package: libqgis-server3.44.14
Description-md5: c63221150996c9c3e07765375705efb7
Description-en: QGIS - shared server library
 QGIS is a Geographic Information System (GIS) which manages, analyzes and
 display databases of geographic information.
 .
 This package contains the shared server library.

Package: libqgisgrass8-3.44.14
Description-md5: 708140c2b18f4c8e06328e190460d96c
Description-en: QGIS - shared grass library
 QGIS is a Geographic Information System (GIS) which manages, analyzes and
 display databases of geographic information.
 .
 This package contains the shared grass library.

Package: libqgispython3.44.14
.
649358,649389c
Package: libqgis-3d3.44.14
Description-md5: 12c7e46a9ba3838604ff324ef2f4b517
Description-en: QGIS - shared 3d library
 QGIS is a Geographic Information System (GIS) which manages, analyzes and
 display databases of geographic information.
 .
 This package contains the shared 3d library.

Package: libqgis-analysis3.44.14
Description-md5: bbce9a642240ceda07f97dc929f9b3b4
Description-en: QGIS - shared analysis library
 QGIS is a Geographic Information System (GIS) which manages, analyzes and
 display databases of geographic information.
 .
 This package contains the shared analysis library.

Package: libqgis-app3.44.14
Description-md5: 23c167da57fa2c94db3ad31618e4bca8
Description-en: QGIS - shared app library
 QGIS is a Geographic Information System (GIS) which manages, analyzes and
 display databases of geographic information.
 .
 This package contains the shared app library.

Package: libqgis-core3.44.14
Description-md5: 088a2dda37829f9928fa200ce0e8ad40
Description-en: QGIS - shared core library
 QGIS is a Geographic Information System (GIS) which manages, analyzes and
 display databases of geographic information.
 .
 This package contains the shared core library.

.
645389a
Package: python3-zhong-hong-hvac
Description-md5: b1434325d59c8dd5b96882e0db7efd22
Description-en: interface for ZhongHong HVAC controllers
 This library communicates with ZhongHong HVAC gateways over TCP and discovers
 air-conditioning units connected to a gateway. It retrieves unit status,
 including power state, operating and fan modes, target and current
 temperatures, and error codes.
 .
 It can switch units on or off, set target temperatures, select operating and
 fan modes, and monitor gateway connectivity. It sends status probes and
 reconnects when a gateway stops responding.

Package: python3-ziggo-mediabox-xl
Description-md5: 60d811e6e07766d9073fecb50f1e7c3c
Description-en: interface for controlling Ziggo Mediabox XL receivers
 This library communicates with a Mediabox XL over local TCP connections to
 check its power state and send remote-control key commands.  It supports
 channel navigation, playback, recording, menu, and numeric keys.
 .
 It also retrieves Ziggo's channel listing, including channel codes and names.

.
645278a
Package: python3-zabbix-utils
Description-md5: 78e4f0956aefef178f2a12a451391023
Description-en: utilities for interacting with Zabbix services
 Zabbix is a monitoring system that collects and visualizes metrics from
 infrastructure, networks, applications, and services. It can detect problems
 in the collected data and issue alerts.
 .
 This library provides synchronous and asynchronous interfaces to the Zabbix
 API. It supports password and API token authentication and exposes API methods
 through attribute access.
 .
 It can send individual or batched item values to Zabbix servers and proxies
 using the Zabbix sender protocol. It can also retrieve item values from Zabbix
 agents using the Zabbix get protocol.

.
643872a
Package: python3-wirelesstagpy
Description-md5: a7d9d5f0a9aeb56e40dfb5238d1cab9f
Description-en: interface to the Wireless Sensor Tags service
 This library retrieves registered sensor tags and their readings from the
 Wireless Sensor Tags cloud service. It exposes temperature, humidity,
 moisture, ambient-light, motion, battery, signal, and device status data for
 supported tags.
 .
 It can arm or disarm monitoring for motion, temperature, humidity, moisture,
 and light; manage event URL notifications; and receive sensor state changes
 through the service's cloud push interface.

.
643476a
Package: python3-waterfurnace
Description-md5: f80f2c16fa9bd59c87fc8d5457c1b439
Description-en: interface for WaterFurnace and GeoStar geothermal systems
 This library communicates with the Symphony services for WaterFurnace and
 GeoStar geothermal systems. It retrieves live temperature, humidity,
 operating mode, airflow, water flow, and power sensor readings, as well as
 historical energy data.
 .
 It can select locations and devices on accounts with multiple systems and
 adjust thermostat modes, heating and cooling setpoints, fan modes, and
 humidity settings. A command-line interface is also included.

.
642982a
Package: python3-varcode
Description-md5: 8fc45d0c2995f0a2ba9aea64f85acb0e
Description-en: DNA coding sequence variation effect predictor
 Varcode is a library for working with genomic variant data in Python
 and predicting the impact of those variants on protein sequences.

Package: varcode
Description-md5: 3155357eec18393af874e91ba7ac87eb
Description-en: DNA coding sequence variation effect predictor
 Varcode is a library for working with genomic variant data in Python
 and predicting the impact of those variants on protein sequences.
 .
 This package with its name lacking the python3 prefix is meant
 to indicate that also two binaries are available to perfom
 the variant annotation.

.
636497a
Package: python3-raygeo
Description-md5: 207ae6913ee1f195d0e9fd42a2efd3cd
Description-en: 2D/3D geometry library for Python
 RayGeo is a high-performance 2D/3D geometry library for Python,
 built in Rust with PyO3.
 .
 This package provides the Python 3 module.

.
632255c
 I/O and the Python interpreter.
.
632243c
 pgzip is a multi-threaded gzip implementation for Python that increases
.
632241c
Description-md5: b775a797fad3b59cc4953ce140df8727
.
629742a
Package: python3-openclatura
Description-md5: 6df82ab79c38d87599ebb1bf41316971
Description-en: deterministic converter from SMILES to IUPAC chemical name
 openclatura names molecules the way the IUPAC Blue Book (2013) says to. It
 walks the RDKit molecular graph, perceives functional groups and ring systems,
 picks the principal parent, numbers it, and assembles the substitutive name.
 .
 There is no model and no lookup table: the same structure always yields the
 same name, and every choice along the way is recorded in a decision trace, so
 the why of a name is recoverable and not just the what.

.
625752a
Package: python3-liblore
Description-md5: 52e5402614d451360643730f140995c8
Description-en: library for interacting with lore.kernel.org
 liblore provides Python functionality for retrieving and processing
 messages and patch discussions from lore.kernel.org and other
 public-inbox servers. It can fetch email threads, parse mbox files,
 and work with public-inbox style archives.
 .
 This package provides the Python 3 module.

.
624295a
Package: python3-iseo-argo-ble
Description-md5: 4049662fab9ea505844e2e825a222237
Description-en: client library for ISEO Argo Bluetooth locks
 This library communicates with compatible ISEO smart locks over Bluetooth Low
 Energy. It supports lock discovery, parses advertised door and battery state,
 and establishes encrypted sessions for sending commands.
 .
 The client can unlock devices, read their state and access logs, and manage
 lock users and gateway registration.

Package: python3-ismartgate
Description-md5: 3cfe9d2e8daa8c667ebe0345e0dd7d34
Description-en: Python API for iSmartGate and GogoGate2 devices
 This package provides an asynchronous Python library for communicating with
 iSmartGate and GogoGate2 garage door and gate controllers.  It can retrieve
 device and door information and issue commands to open or close configured
 doors.
 .
 Command-line tools for querying and controlling supported devices are also
 included.

.
622823,622842d
620308a
Package: python3-fastcrc
Description-md5: 7b4532ba59a6a211e56d0a8f2044a0c2
Description-en: fast CRC-8, CRC-16, CRC-32 and CRC-64 calculations
 fastcrc provides Python functions for calculating a broad collection of
 standard 8-, 16-, 32- and 64-bit cyclic redundancy checks.
 .
 Its calculation routines are implemented in Rust and exposed as a native
 Python extension.

.
619583a
Package: python3-enturclient
Description-md5: 839b97a21f4d8d634b47cd56a2615c62
Description-en: client for Norwegian public transport data from Entur
 This library queries Entur's Journey Planner GraphQL API for departures from
 specified stops and platforms. It provides planned and expected arrival
 and departure times, destinations, line details, and transport modes.
 .
 It identifies which departures use real-time data and calculates delays from
 planned and expected departure times. Platform records can also include
 public codes and geographic coordinates.

.
619483a
Package: python3-energieleser
Description-md5: ecabe804f3bf25b9eecbb4f76d9d0b2b
Description-en: asynchronous client for energieleser energy meter devices
 This library reads measurements from the local HTTP API of energieleser
 devices. It supports stromleser.one electricity meters, gasleser and
 gasleser.pulse gas meters, wasserleser water meters, and wärmeleser heat
 meters.
 .
 It detects the device type and returns device-specific data, including
 measurement values and units when supplied by the device.

Package: python3-energyflip-client
Description-md5: 89dbf3d80effed7f5613d18358dd678a
Description-en: client for the EnergyFlip energy-monitoring API
 This library authenticates with the EnergyFlip service and retrieves current
 readings from electricity and gas meters associated with a customer account.
 It provides electricity import and export data for normal and off-peak
 periods, along with daily, weekly, monthly, and yearly totals.

.
610136,610153d
577493c
 This component provides uuid_* functions to users who run PHP versions
.
577491c
Description-md5: cd341403cbe2a8128c49ac9dbd7fc3b4
.
577476a
Package: php-symfony-polyfill-time
Description-md5: 1c9dd4ea24da3fc424c1884dfba2e89b
Description-en: Symfony polyfill for the Time API added to PHP 8.6
 This component provides a fallback implementation for the time API added
 to PHP 8.6 core:
 .
  * Time\TimeException and Time\Duration
 .
 The Symfony Polyfill project backports features found in the latest PHP
 versions and provides compatibility layers for some extensions and functions.
 It is intended to be used when portability across PHP versions and extensions
 is desired.
 .
 Symfony is a PHP framework, a set of tools and a development methodology.

.
577270,577272c
  * Io\Poll\Context, Io\Poll\Watcher and StreamPollHandle
  * Io\Poll\Backend and Io\Poll\Event enums
  * Io\IoException and the Io\Poll\*Exception hierarchy
.
577267c
 This component provides a fallback implementation for the Io\Poll API added
.
577265c
Description-md5: fb50709448a848ded4ebad2e1d5c8ef6
.
577161c
 (short of ob_iconv_handler).
.
577158c
Description-md5: 096c007f0bf78dd0d6ce6fc71ee64150
.
577126c
 This component provides ctype_* functions to users who run php versions
.
577124c
Description-md5: 96f7e2fc694bd99c13605e1f6bf367df
.
577113c
 This component provides apcu_* functions and the APCUIterator class to
.
577111c
Description-md5: 88df16a0769af8e4daedf4404d5eb8bc
.
534539a
Package: nwg-dock
Description-md5: 58012f86a835182ec579df1988671090
Description-en: GTK-based dock for wlroots-based Wayland compositors
 nwg-dock is a fully configurable dock for the sway Wayland compositor,
 featuring pinned buttons, task buttons, a workspace switcher and a
 launcher button. It is fully customizable via command line arguments
 and CSS styling, and supports an auto-hide mode with hotspot detection
 as well as a resident mode operated via keybindings.
 .
 This application is a part of the nwg-shell project.

.
533511a
Package: numix-icon-theme-square
Description-md5: 35e8f570ac3c425e26109db951d3281e
Description-en: Square icon theme from the Numix project
 Numix Square is an icon theme using simple symbols and vivid backgrounds for a
 fresh, swishy, and modern look. It is developed by the Numix project and
 serves as a companion to the base Numix icon theme (numix-icon-theme).

.
522246a
Package: node-microsoft-fast-element
Description-md5: bda26f8a25de1357e995f2cc91ae3478
Description-en: lightweight means to easily build performant Web Components
 The `@microsoft/fast-element` library is a lightweight means to easily build
 performant, memory-efficient, standards-compliant Web Components. FAST
 Elements work in every major browser and can be used in combination with any
 front-end framework or even without a framework.
 .
 Microsoft FAST is a collection of standards‑based Web Component
 technologies designed to help developers build fast, lightweight,
 framework‑agnostic UI components and design systems
 .
 Node.js is an event-based server-side JavaScript engine.

Package: node-microsoft-fast-web-utilities
Description-md5: 5d34eb661faec6249cb09d5be779b564
Description-en: Collection of utilities intended to be used for web projects
 @microsoft/fast-web-utilities is a collection of utilities intended
 to be used for web projects.
 .
 Node.js is an event-based server-side JavaScript engine.

.
522226,522231d
522188,522200d
516917a
Package: node-exenv-es6
Description-md5: a439f8c8b3a59d16c3232d30c86d05d5
Description-en: React.js's ExecutionEnvironment module extracted as ES6 functions
 exenv-es6 is a React's ExecutionEnvironment module extracted as ES6 functions.
 .
 Node.js is an event-based server-side JavaScript engine.

.
510407,510431d
508650a
Package: nextpnr-himbaechel-xilinx
Description-md5: 52bf4c4eb27c35386f813eb4a47a92e8
Description-en: FPGA place and route tool for Xilinx Artix7/Spartan7/Zynq7
 nextpnr is a FPGA place and route tool. Its purpose is to turn a
 topological description of digital hardware produced by an FPGA logic
 synthesis tool such as yosys into an elaborate map of connections between
 the hardwired functional units available inside the FPGA's fabric.
 .
 In order to verify the fully implemented design for proper operation at
 high speed timing-analysis of the design is also supported.
 .
 nextpnr-himbaechel-xilinx supports the Xilinx Artix7/Spartan7/Zynq7 series
 of FPGAs.
 .
 This package supports only the command-line interface, there is also a GUI
 version in the nextpnr-himbaechel-xilinx-qt package.

Package: nextpnr-himbaechel-xilinx-chipdb
Description-md5: a2a084b1c7f878036dc2b219c9bbd786
Description-en: FPGA place and route tool for Xilinx Artix7/Spartan7/Zynq7 -- chipdb files
 nextpnr is a FPGA place and route tool. Its purpose is to turn a
 topological description of digital hardware produced by an FPGA logic
 synthesis tool such as yosys into an elaborate map of connections between
 the hardwired functional units available inside the FPGA's fabric.
 .
 In order to verify the fully implemented design for proper operation at
 high speed timing-analysis of the design is also supported.
 .
 This package contains the chipdb FPGA layout description files.

Package: nextpnr-himbaechel-xilinx-qt
Description-md5: b51dbb63bd108e73d2931395520f3ba8
Description-en: FPGA place and route tool for Xilinx Artix7/Spartan7/Zynq7 - with GUI
 nextpnr is a FPGA place and route tool. Its purpose is to turn a
 topological description of digital hardware produced by an FPGA logic
 synthesis tool such as yosys into an elaborate map of connections between
 the hardwired functional units available inside the FPGA's fabric.
 .
 In order to verify the fully implemented design for proper operation at
 high speed timing-analysis of the design is also supported.
 .
 nextpnr-himbaechel-xilinx supports the Xilinx Artix7/Spartan7/Zynq7 series
 of FPGAs.
 .
 This package supports both the GUI and command-line interfaces. A slimmer
 command-line only version is available in the nextpnr-himbaechel-xilinx
 package.

.
498660a
Package: mupdf-doc
Description-md5: b6991ee3516f725634bcfe7179ff16e2
Description-en: documentation for the MuPDF library and tools
 MuPDF is a lightweight PDF viewer and toolkit written in portable C.
 It also reads XPS, OpenXPS and ePub documents.
 .
 This package contains the HTML documentation, including the generated
 C and C++ API reference.

.
498642,498649c
Package: libmupdf28.2
Description-md5: d083b8a93eeb2faa1ea3f2d4e7f2fa79
Description-en: shared library for the MuPDF viewer
 MuPDF is a lightweight PDF viewer and toolkit written in portable C.
 It also reads XPS, OpenXPS and ePub documents.
 .
 This package contains the shared library libmupdf and libmupdfcpp.

.
493281,493287c
 This is a transitional package. It can safely be removed.
.
493276,493277c
Description-md5: e2489df83217ef0ffa658e99d02c1f60
Description-en: Morph web applications container
.
493265c
 This is a transitional package. It can safely be removed.
.
493260,493261c
Description-md5: c72315e6d97c161f47178aceee500963
Description-en: Web Browser for Ubuntu Touch
.
493256,493257d
493252,493253c
Description-md5: a0ca70bff9e5ef51849e8a759cb74af0
Description-en: Web Browser for Lomiri
.
476535a
Package: mariadb-backup
Description-md5: 961ed3b509c0e32cd796a5468dae1291
Description-en: Backup tool for MariaDB server
 Based on Xtrabackup, but improved to work with MariaDB server.
 This backup tool is guaranteed to be compatible with MariaDB server.
 .
 Please refer to the MariaDB Documentation for more information on
 how to use this tool.

.
467590a
Package: lsgpus
Description-md5: 2e7f54c3fe1a68abf0d1fc0e4726998f
Description-en: List GPUs with details, outputs, and connected monitors
 lsgpus lists all graphics cards with driver, VRAM, PCI address,
 and for NVIDIA: utilization, memory, temperature, power draw.
 Each output port is mapped to its connected monitor via EDID.
 Supports real-time monitoring (--watch), GPU process listing,
 AMD and NVIDIA stats, and sparkline history.
 .
 Binary renamed from lsgpu to lsgpus in order to avoid a clash with
 the lsgpu(1) tool shipped by the igt-gpu-tools package.

.
465456a
Package: lomiri-location-service-tests
Description-md5: f4267f4902a3311053cfd07a7f6f77c5
Description-en: Lomiri Location Service test executables
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains all test executables.

.
465442a
Package: lomiri-location-service-qt5-plugin
Description-md5: bee45fc8120bcf0a0c486f9d6c689aa2
Description-en: location service aggregating position/velocity/heading
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 Contains the Qt 5 positioning plugin.

Package: lomiri-location-service-qt6-plugin
Description-md5: 567350bf2f2eabb1cfa94551bc193750
Description-en: location service aggregating position/velocity/heading
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 Contains the Qt 6 positioning plugin.

.
465435a
Package: lomiri-location-service-doc
Description-md5: e00543e09e4a6adda51ba3ccae30c45e
Description-en: Lomiri Location Service documentation
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains documentation for the service and client.

.
465428a
Package: lomiri-location-service-bin
Description-md5: 8840915c20da1d15e4b61d54ec98dc89
Description-en: Lomiri Location Service binaries
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains the service executable and man pages.

.
465415a
Description-md5: 4a5ddd1b526cb42caaf629395a2662e3
Description-en: Lomiri Location Service client library
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains the shared library needed by client applications.

Package: liblomiri-location-service3
.
465407a
Description-md5: 41ce8e8b6a4df6471b8faba5f0e8bb1e
Description-en: Lomiri Location Service (development files)
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains header files required to develop clients talking to the
 Lomiri Location Service.

Package: liblomiri-location-service-dev
.
464170a
Package: lomiri-8192-app
Description-md5: 51acf7971d3b4952f38b589e4778f319
Description-en: Sliding tile puzzle game for Lomiri
 8192 is a sliding tile puzzle game for Ubuntu Touch's shell, Lomiri.
 The 8192 game is a mathematics-based sliding tile puzzle game where
 the player slides numbered tiles on the game board in any of the four
 possible directions.  Touching tiles with the same number are merged
 into tiles with number equal to the sum of the numbers on those tiles.
 The objective of the game is to slide and merge tiles to create a tile
 with the number 8192 before the board is full.

.
462723a
Package: llvm-libunwind1
Description-md5: eb120532210ba0a1aa18eb3464ed08dc
Description-en: LLVM unwinder, not compatible with glibc
 llvm-libunwind is the LLVM unwinder, with platform support for DWARF
 unwind info, SjLj, and ARM EHABI. Using it for packaging work inside
 Debian is not recommended, incompatible with glibc.
 .
 The low level libunwind API was designed to work either in-process (aka local)
 or to operate on another process (aka remote), but only the local path has
 been implemented. Remote unwinding remains as future work.

.
462570a
Package: libomp5
Description-md5: e28f50eb4beb8e316b69da2c1c0194c3
Description-en: LLVM OpenMP runtime
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.

.
462296a
Package: libc++abi1
Description-md5: 6a197f8a8ae8385e801b369ea97886ce
Description-en: LLVM low level support for a standard C++ library
 libc++abi is another implementation of low level support for a standard C++
 library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Provide a portable sublayer to ease the porting of libc++

.
462272a
Package: libc++1
Description-md5: 3e11b80d657dd5ed05ee027e3cba65ca
Description-en: LLVM C++ Standard library
 libc++ is another implementation of the C++ standard library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Fast execution.
   * Minimal memory use.
   * Fast compile times.
   * ABI compatibility with gcc's libstdc++ for some low-level features such
     as exception objects, rtti and memory allocation.
   * Extensive unit tests.

.
462098,462108d
461938,461944d
461653,461663d
461614,461628d
455607a
Package: linux-modules-7.1.12+deb14-riscv64
Description-md5: 486c39d07e74a0b7f45dbab6f3aabcf7
Description-en: Linux 7.1.12 for 64-bit RISC-V platforms (modules)
 This contains the kernel modules for Linux 7.1.12 on 64-bit RISC-V
 platforms.
 .
 This does not provide a complete kernel installation.  You should normally
 install linux-image-7.1.12+deb14-riscv64.

.
454552a
Package: linux-image-7.1.12+deb14-riscv64
Description-md5: 6c7723dee0e9ba29942ef9ea35d4fdde
Description-en: Linux 7.1.12 for 64-bit RISC-V platforms
 The Linux kernel 7.1.12 and modules for use on 64-bit RISC-V platforms.

Package: linux-image-7.1.12+deb14-riscv64-dbg
Description-md5: fd596ffc1f6bc5555063728c70408baa
Description-en: Linux 7.1.12 for 64-bit RISC-V platforms (debug symbols)
 This package provides the detached debug symbols for the Linux kernel and
 modules in linux-image-7.1.12+deb14-riscv64.

.
453524a
Package: linux-headers-7.1.12+deb14-riscv64
Description-md5: 659fba85379fa6e0cdeb548bf337b347
Description-en: Linux 7.1.12 for 64-bit RISC-V platforms (module development)
 This package provides the architecture-specific kernel header files for
 Linux kernel 7.1.12+deb14-riscv64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-7.1.12+deb14-riscv64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-7.1.12+deb14-riscv64 package.

.
452231a
Package: linux-binary-7.1.12+deb14-riscv64
Description-md5: 0e1d242acbb02227c76697f109e1eea5
Description-en: Linux 7.1.12 for 64-bit RISC-V platforms (kernel image)
 This package contains the kernel image for Linux 7.1.12 on 64-bit RISC-V
 platforms.
 .
 This does not provide a complete kernel installation.  You should normally
 install linux-image-7.1.12+deb14-riscv64.

.
451674a
Package: linux-base-7.1.12+deb14-riscv64
Description-md5: bd2a3cd23390943fe409060b520c6130
Description-en: Linux 7.1.12 for 64-bit RISC-V platforms (base files)
 This package contains files for Linux 7.1.12 on 64-bit RISC-V platforms
 that are used for both installing the kernel and building additional
 modules.

.
436836a
Package: libtie-datauuid-perl
Description-md5: 78b40b675849d5c55d915f5400f232a8
Description-en: tie interface to Data::UUID
 Tie::DataUUID ties a scalar to Data::UUID so that reading the variable yields
 a freshly generated UUID each time. It also exports a ready-tied $uuid
 variable, so a UUID can be interpolated straight into a string without
 calling a constructor.
 .
 The module is a thin convenience layer over Data::UUID and adds no
 UUID-generation logic of its own.

.
420968,420980d
382802a
Description-md5: f31c7c461044d427ce2e63534056bba2
Description-en: Development files for libhandy - transitional package
 libhandy provides GTK widgets and GObjects to ease developing
 applications for mobile phones.
 .
 This is a transitional package. It can safely be removed.

Package: libhandy-dev
.
362808a
Package: libconfig15
Description-md5: f9e4a016d7fc40b75858220651e186b8
Description-en: parsing/manipulation of structured configuration files
 This library features a fully reentrant parser and includes bindings for
 both the C and C++ programming languages. It runs on modern POSIX-compliant
 systems such as Linux, Solaris, and Mac OS X (Darwin), as well as on
 Microsoft Windows 2000/XP and later (Visual Studio or MinGW).
 .
 This library allows parsing, manipulating and writing structured configuration
 files.

.
362764a
Package: libconfig++15
Description-md5: 9a8df51133928631226892f0ee52493b
Description-en: parsing/manipulation of structured configuration files (C++ binding)
 This library features a fully reentrant parser and includes bindings for
 both the C and C++ programming languages. It runs on modern POSIX-compliant
 systems such as Linux, Solaris, and Mac OS X (Darwin), as well as on
 Microsoft Windows 2000/XP and later (Visual Studio or MinGW).
 .
 This library allows parsing, manipulating and writing structured configuration
 files.
 .
 This is the C++ binding.

.
358848c
 This library provides support for the Pulse-Eight USB-CEC adapter and
 other CEC capable hardware, like the Raspberry Pi.
.
358846c
Description-md5: bafb88d25dcce1ce9649821437194476
.
358844a
Package: libcec8
Description-md5: 8fa24da000d1436d85e6a210d9640157
Description-en: USB CEC Adaptor communication Library (shared library)
 This library provides support for the Pulse-Eight USB-CEC adapter and
 other CEC capable hardware, like the Raspberry Pi.
 .
 This package provides the shared library.

Package: librust-libcec-dev
Description-md5: 821252148ea52be8e6fa05ce6bda7ec8
Description-en: Rust bindings for libCEC
 This library provides support for the Pulse-Eight USB-CEC adapter and
 other CEC capable hardware, like the Raspberry Pi.
 .
 This package provides the Rust binding for libCEC, which wraps its C
 API and links the shared library. As is usual, this package contains
 the crate source.

Package: node-libcec
Description-md5: 8c1b813a320216dea4f47d95066472ef
Description-en: Node.js bindings for libCEC
 This library provides support for the Pulse-Eight USB-CEC adapter and
 other CEC capable hardware, like the Raspberry Pi.
 .
 This package provides a native Node.js (N-API) addon that binds libCEC
 over its C API, exposing an EventEmitter-based CecAdapter to JavaScript.

.
320947,320958c
Package: libjim0.84
Description-md5: 279a797efd0ed3b69ec3c5bf5a1ef8d8
Description-en: small-footprint implementation of Tcl - shared library
 Jim is an opensource small-footprint implementation of the Tcl programming
 language. It implements a large subset of Tcl and adds new features like
 references with garbage collection, closures, built-in Object Oriented
 Programming system, Functional Programming commands, first-class arrays and
 UTF-8 support. All this with a binary size of about 100-200kB (depending upon
 selected options).
 .
 This package provides the libjim shared library.

.
314559,314577d
242172,242173d
242167,242170c
Description-md5: ad43d0cccaff3f0925a688073755acd8
Description-en: Calendar widget for GTK+ (Python 3)
 The GooCalendar module supplies a calendar widget that can display
 a month view and a week view. It also supplies classes to manage
.
238906c
    (https://www.cs.columbia.edu/~nahum/w6998/papers/ton97-timing-wheels.
.
238896c
Description-md5: 4e46a542a30986583cd091e609d48122
.
233909,233915d
224929a
Package: golang-github-harrymichal-go-version-dev
Description-md5: e8426399ee400e0d04c91562b2d0c34d
Description-en: Version normalizer and comparison library for go (library)
 Version normalizer and comparison library for go, heavy based on PHP
 version_compare function and Version comparison libs from Composer
 (https://github.com/composer/composer) PHP project
 .
 This package contains the library.

.
219229,219233d
213815,213824d
213788,213807d
213388a
Package: golang-forgejo-xorm-xorm-dev
Description-md5: b8614e4b8458c853d8361fa6d51e9347
Description-en: Simple and Powerful ORM for Go (library)
 XORM is a Object-Relational Mapper (ORM) library written in Go. It maps Go
 structs to database tables, allowing to interact with databases like MariaDB,
 PostgreSQL, and SQLite using Go code instead of writing raw SQL.

.
196362a
Package: libgeos3.15.0
Description-md5: a6f62432dff85777eea957f25b02682d
Description-en: Geometry engine for Geographic Information Systems - C++ Library
 GEOS provides a spatial object model and fundamental geometric
 functions. It implements the geometry model defined in the
 OpenGIS Consortium Simple Features Specification for SQL.
 Functions provided include:
 .
   * spatial predicates (based on the DE-9IM model),
   * overlay functions (intersection, difference, union,
     symmetric difference),
   * buffer,
   * convex hull,
   * area and distance functions, and
   * topological validity checking
 .
 This package contains the C++ library. A stable C library is provided
 by the libgeos-c* package and should be preferred by third-parties
 programs.

.
133430a
Package: fonts-the-neue-black
Description-md5: a9ac9e4d9948bea4472bbc1bda559283
Description-en: display sans serif font with a robust character set
 The open-source release of The Neue Black is in partnership with
 designer Tré Seals of Vocal Type Co. The Neue Black is a display sans
 serif with a robust character set that has over 25 ligatures and
 various inktrap alternates.
 .
 This package contains the static font in OTF and WOFF2 formats.

.
127448a
Package: fonts-esteban
Description-md5: d62ca780ca0233ca3b181ab5784cf915
Description-en: Font for literature and poetry
 Esteban is a typeface intended to be used in texts, especially literature
 and poetry. Its a serif font with medium contrast, tall x height, medium
 compression, and robust serifs. It offers personality, readability and economy.
 .
 One of the most important features of Esteban is its stroke, that loses or
 gains weight in the stems. This feature was defined from the manuscripts of
 Jorge Alfredo Díaz Esteban, a writer who used a tool that can generate
 modulated strokes. This means the stroke width varies due to the pressure of
 the pen on the paper, and this quality allows the font to have a presence on
 the page that makes texts more dynamic. The precise level of contrast was
 decided by experimenting with various 'colors' of density that emerge in text
 settings. This allows Esteban to achieve good performance even in medium and
 low quality prints and as a web font.

.
126554a
Package: fonts-albert-sans
Description-md5: d6224c2d47265aaa3bbbf343dbec3065
Description-en: Modern geometric sans-serif font
 Albert Sans is a modern geometric sans serif family, inspired by the
 type characteristics of Scandinavian architects and designers in the
 early 20th century. The Albert Sans family includes ten weights from
 Thin to Black and supports over two hundred languages.
 .
 Designed by the Danish type designer Andreas Rasmussen from a.Foundry.

.
118283,118288d
111996a
Package: far2l-wx
Description-md5: 3f01902de34a20d1623fa3fbb28de874
Description-en: Linux port of FAR v2 - WX GTK UI
 This is a clone of FAR manager for Windows, similar, but more
 powerful than Norton Commander/Midnight Commander.
 .
 Plug-ins that are currently working:
  - NetRocks (SFTP/SCP/SHELL/FTP/FTPS/SMB/NFS/WebDAV)
  - colorer
  - multiarc
  - tmppanel
  - Advanced compare
  - filecase
  - inside
  - align
  - autowrap
  - drawline
  - editcase
  - editorcomp
  - incsrch
  - SimpleIndent
  - Calculator
  - Python
  - arclite (disabled by default)
  - hexitor
  - OpenWith
  - ImageViewer
  - edsort
  - truncate
  - memo
 .
 This package contains a WX GTK user interface for far2l. It will be used
 automatically when running far2l in a graphical desktop environment.

.
111941,111995c
Description-md5: f39369faf79039af1783b0a22511e0ef
Description-en: Linux port of FAR v2
 This is a clone of FAR manager for Windows, similar, but more
 powerful than Norton Commander/Midnight Commander.
 .
 Plug-ins that are currently working:
  - NetRocks (SFTP/SCP/SHELL/FTP/FTPS/SMB/NFS/WebDAV)
  - colorer
  - multiarc
  - tmppanel
  - Advanced compare
  - filecase
  - inside
  - align
  - autowrap
  - drawline
  - editcase
  - editorcomp
  - incsrch
  - SimpleIndent
  - Calculator
  - Python
  - arclite (disabled by default)
  - hexitor
  - OpenWith
  - ImageViewer
  - edsort
  - truncate
  - memo

Package: far2l-data
Description-md5: 5e2af8b31859d7b5e12f672a502c0300
Description-en: Linux port of FAR v2, data files
 This is a clone of FAR manager for Windows, similar, but more
 powerful than Norton Commander/Midnight Commander.
 .
 Plug-ins that are currently working:
  - NetRocks (SFTP/SCP/SHELL/FTP/FTPS/SMB/NFS/WebDAV)
  - colorer
  - multiarc
  - tmppanel
  - Advanced compare
  - filecase
  - inside
  - align
  - autowrap
  - drawline
  - editcase
  - editorcomp
  - incsrch
  - SimpleIndent
  - Calculator
  - Python
  - arclite (disabled by default)
  - hexitor
  - OpenWith
  - ImageViewer
  - edsort
  - truncate
  - memo
 .
 This package contains the data files needed to run far2l.
.
93266a
Package: dracut-core
Description-md5: d055d51e8c4034927ecc0f5de64c62ff
Description-en: dracut is an event driven initramfs infrastructure (core tools)
 Unlike existing initramfs's, this is an attempt at having as little as
 possible hard-coded into the initramfs as possible.  The initramfs has
 (basically) one purpose in life -- getting the rootfs mounted so that
 it can transition to the real rootfs.  This is all driven off of
 device availability.  Therefore, instead of scripts hard-coded to do
 various things, it depends on udev to create device nodes and
 to detect the rootfs.
 Having the root on MD, LVM2, LUKS is supported as well as NFS, iSCSI,
 NBD and FCOE with dracut-network.
 .
 These Dracut modules need suggested packages:
  * crypt: cryptsetup or systemd-cryptsetup
  * dm: dmsetup
  * dmraid: kpartx
  * dmsquash-live: isomd5sum (optionally)
  * dmsquash-live-autooverlay: parted
  * dracut-systemd: systemd-cryptsetup (when crypt and systemd are used)
  * lvm: lvm2
  * lvmmerge: lvm2
  * lvmthinpool-monitor: lvm2
  * mdraid: mdadm
  * multipath: kpartx
  * squash-squashfs: squashfs-tools
  * systemd-cryptsetup: systemd-cryptsetup
  * systemd-pcrextend: systemd-tpm

.
61907,61920c
Description-md5: a5b9ae07da0a1ce10310d0f72100da4a
Description-en: open and reliable container runtime
 Containerd is an industry-standard container runtime with an emphasis on
 simplicity, robustness and portability. It is available as a daemon for
 Linux and Windows, which can manage the complete container life cycle of
 its host system: image transfer and storage, container execution and
 supervision, low-level storage and network attachments, etc.
 .
 Containerd is designed to be embedded into a larger system, rather than
 being used directly by developers or end-users.
 .
 This package contains the binaries for the containerd2 version. It
 supersedes the containerd1 version from the containerd package

.
35799,35941c
Description-md5: a1defd1f016d58a01af413002604f3e5
Description-en: Memory-efficient hashtable implementations for Python3, written in Cython.
 Memory-efficient hashtable implementations for Python, written in Cython.
 .
 HashTable
 ---------
 .
 ``HashTable`` is a fairly low-level implementation; usually one will want to use the ``HashTableNT`` wrapper. Read on for the basics...
 .
 Keys and Values
 ~~~~~~~~~~~~~~~
 .
 The keys MUST be perfectly random ``bytes`` of arbitrary but fixed length (at least 4 bytes), like from a cryptographic hash (SHA-256, HMAC-SHA-256, ...).
 The implementation relies on this "perfectly random" property and does not implement its own hash function; it just takes the leading 32 bits of the given key.
 .
 The values are ``bytes`` of arbitrary but fixed length.
 .
 The lengths of the keys and values are defined when creating a ``HashTable`` instance; thereafter, the lengths must always match the defined sizes.
 .
 Implementation details
 ~~~~~~~~~~~~~~~~~~~~~~
 .
 To have little memory overhead overall, the hashtable only stores ``uint32_t``
 indices into separate keys and values arrays (short: kv arrays).
 .
 A new key is appended to the keys array. The corresponding value is appended to the values array. After that, the key and value do not change their
 index as long as they exist in the hashtable and the ht and kv arrays are in
 memory. Even when kv pairs are deleted from ``HashTable``, the kv arrays never
 shrink and the indices of other kv pairs don't change.
 .
 This is because we want to have stable array indices for the keys/values, so the
 indices can be used outside of ``HashTable`` as memory-efficient references.
 .
 Memory allocated
 ~~~~~~~~~~~~~~~~
 .
 For a hashtable load factor of 0.1 – 0.5, a kv array growth factor of 1.3, and
 N kv pairs, memory usage in bytes is approximately:
 .
 - hashtable: from ``N * 4 / 0.5`` to ``N * 4 / 0.1``
 - Keys/Values: from ``N * len(key + value) * 1.0`` to ``N * len(key + value) * 1.3``
 - Overall: from ``N * (8 + len(key + value))`` to ``N * (40 + len(key + value) * 1.3)``
 .
 When the hashtable or the kv arrays are resized, there will be brief memory-usage spikes. For the kv arrays, ``realloc()`` is used to avoid copying data and to minimize memory-usage spikes, if possible.
 .
 HashTableNT
 -----------
 .
 ``HashTableNT`` is a convenience wrapper around ``HashTable``:
 .
 - Accepts and returns ``namedtuple`` values.
 - Implements persistence: can read the hashtable from a file and write it to a file.
 .
 Keys and Values
 ~~~~~~~~~~~~~~~
 .
 Keys: ``bytes``, see ``HashTable``.
 .
 Values: any fixed ``namedtuple`` type that can be serialized to ``bytes``
 by Python's ``struct`` module using a given format string.
 .
 When setting a value, it is automatically serialized. When a value is returned,
 it will be a ``namedtuple`` of the given type.
 .
 The ``byte_order`` argument (``"little"`` by default, also ``"big"``,
 ``"network"`` or ``"native"``) selects the byte order used for serialization,
 so a serialized hashtable can be read back on a machine with a different
 native byte order.
 .
 Persistence
 ~~~~~~~~~~~
 .
 ``HashTableNT`` has ``.write()`` and ``.read()`` methods to save/load its
 contents to/from a file, using an efficient binary format.
 .
 When a ``HashTableNT`` is saved to disk, only the non-deleted entries are
 persisted. When it is loaded from disk, a new hashtable and new, dense
 kv arrays are built; thus, kv indices will be different!
 .
 Iterating over key-prefix partitions
 ------------------------------------
 .
 ``items()`` accepts two optional keyword arguments to iterate over only the
 items whose keys start with a given bit prefix:
 .
 - ``prefix_bits``: number of leading key bits to compare, ``0 .. 32``
   (``0``, the default, means: no filtering)
 - ``prefix``: expected value of these leading bits, given in the integer's
   low bits, thus ``0 <= prefix < 2 ** prefix_bits``
 .
 As the keys are perfectly random, this partitions the items into
 ``2 ** prefix_bits`` roughly equally sized, disjoint sets, and iterating over
 all prefixes visits every item exactly once. Only the matching keys/values are
 built as Python objects, so a huge hashtable can be processed in batches with a
 small memory footprint::
 .
     prefix_bits = 8  # 256 partitions
     for prefix in range(2 ** prefix_bits):
         for key, value in ht.items(prefix_bits=prefix_bits, prefix=prefix):
             ...  # process one partition
 .
 API
 ---
 .
 HashTable and HashTableNT have an API similar to a dict:
 .
 - ``__init__(items=None, ...)``: optionally fills the new table from a dict or
   an iterable of ``(key, value)`` pairs
 - ``__setitem__`` / ``__getitem__`` / ``__delitem__`` / ``__contains__``
 - ``get()``, ``pop()``, ``setdefault()``, ``clear()``
 - ``items()`` (see above), ``__len__``
 - ``stats`` property with operation/resize counters
 .
 Additionally, both offer access to the stable kv indices (see
 "Implementation details"), which can be used as memory-efficient references:
 .
 - ``k_to_idx()``, ``idx_to_k()``, ``kv_to_idx()``, ``idx_to_kv()``
 .
 HashTableNT also has:
 .
 - ``update()`` (like ``dict.update()``)
 - ``write()``, ``read()``, ``size()`` (see "Persistence"; ``size()`` gives a
   rough worst-case estimate of the on-disk size)
 .
 Example code
 ------------
 .
 ::
 .
     # HashTableNT mapping 256-bit key [bytes] --> Chunk value [namedtuple]
     Chunk = namedtuple("Chunk", ["refcount", "size"])
     ChunkFormat = namedtuple("ChunkFormat", ["refcount", "size"])
     chunk_format = ChunkFormat(refcount="I", size="I")
 .
     # 256-bit (32-byte) key, 2x 32-bit (4-byte) values
     ht = HashTableNT(key_size=32, value_type=Chunk, value_format=chunk_format)
 .
     key = b"x" * 32  # the key is usually from a cryptographic hash function
     value = Chunk(refcount=1, size=42)
     ht[key] = value
     assert ht[key] == value
 .
     for key, value in ht.items():
         assert isinstance(key, bytes)
         assert isinstance(value, Chunk)
 .
     file = "dump.bin"  # giving an fd of a file opened in binary mode also works
     ht.write(file)
     ht = HashTableNT.read(file)
 .
 Want a demo?
 ------------
 .
 Run ``borghash-demo`` after installing the ``borghash`` package.
 .
 It will show you the demo code, run it, and print the results for your machine.
 .
 Results on an Apple MacBook Pro (M3 Pro CPU) look like:
 .
 ::
 .
     HashTableNT in-memory ops (count=50000): insert: 0.042s, lookup: 0.045s, pop: 0.043s.
     HashTableNT serialization (count=50000): write: 0.014s, read: 0.010s.
 .
 State of this project
 ---------------------
 .
 **API is still unstable and expected to change as development continues.**
 .
 **As long as the API is unstable, there will be no data migration tools,
 e.g., for reading an existing serialized hashtable.**
 .
 There might be missing features or optimization potential; feedback is welcome!

.
20430,20431c
Description-md5: c108864a802ae0e9f28ea3e6d54ded85
Description-en: automated option processing library based on autogen - dev files
.
19347a
Package: libaudtag4
Description-md5: e742e2a22c1ee90c0e844a39496eab95
Description-en: audacious media player (libaudtag shared library)
 Audacious is a fork of beep-media-player which supports Winamp skins
 and many codecs.
 .
 In the default install, the following codecs are supported:
 .
  * MP3
  * Ogg Vorbis / Theora
  * AAC and AAC+
  * FLAC
  * ALAC
  * Windows Media (WMA)
  * WAVE
 .
 Additionally, Audacious is extendable through plugins, and contains
 other useful features like LIRC support. Support for many more codecs
 can also be added through plugins.
 .
 This package provides the libaudtag shared library.

.
19325a
Package: libaudqt4
Description-md5: 89ae58032cd62179e935cf6a722f7d1d
Description-en: audacious media player (libaudqt shared library)
 Audacious is a fork of beep-media-player which supports Winamp skins
 and many codecs.
 .
 In the default install, the following codecs are supported:
 .
  * MP3
  * Ogg Vorbis / Theora
  * AAC and AAC+
  * FLAC
  * ALAC
  * Windows Media (WMA)
  * WAVE
 .
 Additionally, Audacious is extendable through plugins, and contains
 other useful features like LIRC support. Support for many more codecs
 can also be added through plugins.
 .
 This package provides the libaudqt shared library.

.
19303a
Package: libaudgui7
Description-md5: 53d8716a3af88c9d5a9cf67a787e0129
Description-en: audacious media player (libaudgui shared library)
 Audacious is a fork of beep-media-player which supports Winamp skins
 and many codecs.
 .
 In the default install, the following codecs are supported:
 .
  * MP3
  * Ogg Vorbis / Theora
  * AAC and AAC+
  * FLAC
  * ALAC
  * Windows Media (WMA)
  * WAVE
 .
 Additionally, Audacious is extendable through plugins, and contains
 other useful features like LIRC support. Support for many more codecs
 can also be added through plugins.
 .
 This package provides the libaudgui shared library.

.
19281a
Package: libaudcore6
Description-md5: 2a0caa32f6a6478ded9a174f96a8e23b
Description-en: audacious core engine library
 Audacious is a fork of beep-media-player which supports Winamp skins
 and many codecs.
 .
 In the default install, the following codecs are supported:
 .
  * MP3
  * Ogg Vorbis / Theora
  * AAC and AAC+
  * FLAC
  * ALAC
  * Windows Media (WMA)
  * WAVE
 .
 Additionally, Audacious is extendable through plugins, and contains
 other useful features like LIRC support. Support for many more codecs
 can also be added through plugins.
 .
 This package contains a library which provides core functionality
 of Audacious.

.
10110,10119c
Package: libanthy2
Description-md5: 8782ebf3bba63e05d041c63e80ce0c29
Description-en: Japanese kana-kanji conversion - runtime library
 Anthy is kana-kanji conversion engine for Japanese.  It converts
 hiragana text to mixed kana and kanji.  It is implemented as a library
 and stores private information in ~/.anthy/.
 .
 This package provides runtime shared libraries for Anthy.

Package: libanthyinput-dev
Description-md5: 2e8201efca4c16c1c92f294710ca8bea
Description-en: Japanese kana-kanji conversion - development files for input
 Anthy is kana-kanji conversion engine for Japanese.  It converts
 hiragana text to mixed kana and kanji.  It is implemented as a library
 and stores private information in ~/.anthy/.
 .
 This package provides the files necessary for compiling programs that
 use Anthy as an input method.

.
10092,10100c
Description-md5: 4e0b1a87b0ce5a8785e46b1b84e7d614
Description-en: Japanese kana-kanji conversion - development files
 Anthy is kana-kanji conversion engine for Japanese.  It converts
 hiragana text to mixed kana and kanji.  It is implemented as a library
 and stores private information in ~/.anthy/.
 .
 This package provides the files necessary for compiling programs that
 use Anthy.

.
