727283a

Package: librust-trippy-tui-dev
Description-md5: d875d913fac186510a2bcaa69d4eec4d
Description-en: Network diagnostic tool - Rust source code
 Source code for Debianized Rust crate "trippy-tui"
.
724408a
Package: librust-snakecase-dev
Description-md5: e9dc766efb83d002cbf219778472a564
Description-en: ASCII and Unicode snake_case conversion - Rust source code
 Source code for Debianized Rust crate "snakecase"

.
722128a

Package: rsopv
Description-md5: 956c26f8ee09cab5e1dd5e883e4558f9
Description-en: Stateless OpenPGP Verification-only (SOPV) CLI (rpgp and rpgpie)
 rsopv offers a Rust-based implementation of the Stateless OpenPGP
 Command Line Interface's verification-only subset (also known as "sopv").
 .
 This standards-derived interface is an implementation of
 https://datatracker.ietf.org/doc/draft-dkg-openpgp-stateless-cli/,
 intended to be used in interoperability tests and simple OpenPGP
 commands, while leaving no trace in the filesystem.
 This package contains the following binaries built from the Rust crate
 "rsop":
.
722124,722125c
Description-md5: 54c5f2f288b6deef889b6f855828b540
Description-en: Stateless OpenPGP (SOP) CLI tool based on rPGP and rpgpie
 rsop offers a Rust-based implementation of the Stateless OpenPGP
 Command Line Interface.
 .
 This standards-derived interface is an implementation of
 https://datatracker.ietf.org/doc/draft-dkg-openpgp-stateless-cli/,
 intended to be used in interoperability tests and simple OpenPGP
 commands, while leaving no trace in the filesystem.
.
719130a

Package: librust-pfm-dev
Description-md5: 497d2ad6a05104a768585a2e005e8cd3
Description-en: High-level wrapper of libpfm4 - Rust source code
 Source code for Debianized Rust crate "pfm"
.
717121a
Package: librust-murmur3-dev
Description-md5: cc650a1fa10e9cfb77ac7cef7ced7869
Description-en: Murmur3 hash - Rust source code
 Source code for Debianized Rust crate "murmur3"

.
716606a
Package: librust-md4-dev
Description-md5: e1b0a31f15b8eb79f49bffcf7cf87d91
Description-en: MD4 hash function - Rust source code
 Source code for Debianized Rust crate "md4"

.
715047a
Package: librust-lamxfs-dev
Description-md5: 7c7a57674a0cfe55972fee758ac1cecb
Description-en: no_std read-only XFS filesystem reader for UEFI bootloaders
 Source code for Debianized Rust crate "lamxfs"

.
707482a
Package: librust-cron-dev
Description-md5: f658af8ec8b823466b6b8d073e742442
Description-en: Cron expression parser and schedule explorer - Rust source code
 Source code for Debianized Rust crate "cron"

.
707091a
Package: librust-const-gen-dev
Description-md5: bbaf10754eb4bcf82a9cf754b1cf0897
Description-en: Generating (relatively) complex compile-time constants in rust - Rust source code
 Source code for Debianized Rust crate "const-gen"

.
705082a

Package: librust-blake2-dev
Description-md5: cbfe8e184bc7822c341acd9e84343c8d
Description-en: BLAKE2 hash functions - Rust source code
 Source code for Debianized Rust crate "blake2"
.
704842a
Description-md5: 21111e0f5a7127ca10d8970ae10a88f4
Description-en: Compact binary serialization / deserialization library - Rust source code
 Source code for Debianized Rust crate "bincode"

Package: librust-bincode-dev
.
704324a
Package: librust-atuin-vt100-dev
Description-md5: 2fbfdfcbb2fe27ffcf7202b82b4095a8
Description-en: Fork of https://crates.io/crates/vt100 - Rust source code
 Source code for Debianized Rust crate "atuin-vt100"

.
670322a
Package: r-cran-rncl
Description-md5: f9ba02f5ffab17a353bbeb6c3a62529b
Description-en: Interface to the Nexus Class Library
 An interface to the Nexus Class Library which allows parsing of NEXUS, Newick
 and other phylogenetic tree file formats. It provides elements of the file
 that can be used to build phylogenetic objects such as ape's 'phylo'
 or phylobase's 'phylo4(d)'. This functionality is demonstrated
 with 'read_newick_phylo()' and 'read_nexus_phylo()'.

.
665664a
Package: r-cran-ggdist
Description-md5: 5818db953c948aec8d890276473a0d9f
Description-en: Visualizations of Distributions and Uncertainty
 Provides primitives for visualizing distributions using 'ggplot2' that are
 particularly tuned for visualizing uncertainty in either a frequentist or
 Bayesian mode. Both analytical distributions (such as frequentist confidence
 distributions or Bayesian priors) and distributions represented as samples
 (such as bootstrap distributions or Bayesian posterior samples) are
 easily visualized. Visualization primitives include but are not limited to:
 points with multiple uncertainty intervals, eye plots (Spiegelhalter D.,
 1999) <https://ideas.repec.org/a/bla/jorssa/v162y1999i1p45-58.html>,
 density plots, gradient plots, dot plots (Wilkinson L., 1999)
 <doi:10.1080/00031305.1999.10474474>, quantile dot plots (Kay M., Kola T.,
 Hullman J., Munson S., 2016) <doi:10.1145/2858036.2858558>, complementary
 cumulative distribution function barplots (Fernandes M., Walls L., Munson S.,
 Hullman J., Kay M., 2018) <doi:10.1145/3173574.3173718>, and fit curves with
 multiple uncertainty ribbons.

.
651614,651615c
Description-md5: 16c54e5e1f27b7b1b6c450c5b8764bfa
Description-en: Qt5 Suru style for QtQuick Controls 2
 This is a style for QtQuickControls 2 providing a uniform look'n'feel
 for apps targetting the Lomiri Operatoring / Ubuntu Touch.
 .
 This QQC2 style explicitly uses the Suru icon theme for drawing its
 elements.

Package: qml6-module-qtquick-controls2-suru
Description-md5: 5d9af15ab048b5c88d50e305498bc2eb
Description-en: Qt6 Suru style for QtQuick Controls 2
.
637122a
Package: python3-raygeo
Description-md5: 207ae6913ee1f195d0e9fd42a2efd3cd
Description-en: 2D/3D geometry library for Python
 RayGeo is a high-performance 2D/3D geometry library for Python,
 built in Rust with PyO3.
 .
 This package provides the Python 3 module.

.
623406,623425d
620891a
Package: python3-fastcrc
Description-md5: 7b4532ba59a6a211e56d0a8f2044a0c2
Description-en: fast CRC-8, CRC-16, CRC-32 and CRC-64 calculations
 fastcrc provides Python functions for calculating a broad collection of
 standard 8-, 16-, 32- and 64-bit cyclic redundancy checks.
 .
 Its calculation routines are implemented in Rust and exposed as a native
 Python extension.

.
610689,610706d
510917,510941d
509160a
Package: nextpnr-himbaechel-xilinx
Description-md5: 52bf4c4eb27c35386f813eb4a47a92e8
Description-en: FPGA place and route tool for Xilinx Artix7/Spartan7/Zynq7
 nextpnr is a FPGA place and route tool. Its purpose is to turn a
 topological description of digital hardware produced by an FPGA logic
 synthesis tool such as yosys into an elaborate map of connections between
 the hardwired functional units available inside the FPGA's fabric.
 .
 In order to verify the fully implemented design for proper operation at
 high speed timing-analysis of the design is also supported.
 .
 nextpnr-himbaechel-xilinx supports the Xilinx Artix7/Spartan7/Zynq7 series
 of FPGAs.
 .
 This package supports only the command-line interface, there is also a GUI
 version in the nextpnr-himbaechel-xilinx-qt package.

Package: nextpnr-himbaechel-xilinx-chipdb
Description-md5: a2a084b1c7f878036dc2b219c9bbd786
Description-en: FPGA place and route tool for Xilinx Artix7/Spartan7/Zynq7 -- chipdb files
 nextpnr is a FPGA place and route tool. Its purpose is to turn a
 topological description of digital hardware produced by an FPGA logic
 synthesis tool such as yosys into an elaborate map of connections between
 the hardwired functional units available inside the FPGA's fabric.
 .
 In order to verify the fully implemented design for proper operation at
 high speed timing-analysis of the design is also supported.
 .
 This package contains the chipdb FPGA layout description files.

Package: nextpnr-himbaechel-xilinx-qt
Description-md5: b51dbb63bd108e73d2931395520f3ba8
Description-en: FPGA place and route tool for Xilinx Artix7/Spartan7/Zynq7 - with GUI
 nextpnr is a FPGA place and route tool. Its purpose is to turn a
 topological description of digital hardware produced by an FPGA logic
 synthesis tool such as yosys into an elaborate map of connections between
 the hardwired functional units available inside the FPGA's fabric.
 .
 In order to verify the fully implemented design for proper operation at
 high speed timing-analysis of the design is also supported.
 .
 nextpnr-himbaechel-xilinx supports the Xilinx Artix7/Spartan7/Zynq7 series
 of FPGAs.
 .
 This package supports both the GUI and command-line interfaces. A slimmer
 command-line only version is available in the nextpnr-himbaechel-xilinx
 package.

.
499135,499142d
493774,493780c
 This is a transitional package. It can safely be removed.
.
493769,493770c
Description-md5: e2489df83217ef0ffa658e99d02c1f60
Description-en: Morph web applications container
.
493758c
 This is a transitional package. It can safely be removed.
.
493753,493754c
Description-md5: c72315e6d97c161f47178aceee500963
Description-en: Web Browser for Ubuntu Touch
.
493749,493750d
493745,493746c
Description-md5: a0ca70bff9e5ef51849e8a759cb74af0
Description-en: Web Browser for Lomiri
.
465928a
Package: lomiri-location-service-tests
Description-md5: f4267f4902a3311053cfd07a7f6f77c5
Description-en: Lomiri Location Service test executables
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains all test executables.

.
465914a
Package: lomiri-location-service-qt5-plugin
Description-md5: bee45fc8120bcf0a0c486f9d6c689aa2
Description-en: location service aggregating position/velocity/heading
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 Contains the Qt 5 positioning plugin.

Package: lomiri-location-service-qt6-plugin
Description-md5: 567350bf2f2eabb1cfa94551bc193750
Description-en: location service aggregating position/velocity/heading
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 Contains the Qt 6 positioning plugin.

.
465907a
Package: lomiri-location-service-doc
Description-md5: e00543e09e4a6adda51ba3ccae30c45e
Description-en: Lomiri Location Service documentation
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains documentation for the service and client.

.
465900a
Package: lomiri-location-service-bin
Description-md5: 8840915c20da1d15e4b61d54ec98dc89
Description-en: Lomiri Location Service binaries
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains the service executable and man pages.

.
465887a
Description-md5: 4a5ddd1b526cb42caaf629395a2662e3
Description-en: Lomiri Location Service client library
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains the shared library needed by client applications.

Package: liblomiri-location-service3
.
465879a
Description-md5: 41ce8e8b6a4df6471b8faba5f0e8bb1e
Description-en: Lomiri Location Service (development files)
 Aggregates position/velocity/heading updates and exports them over D-Bus.
 .
 This package contains header files required to develop clients talking to the
 Lomiri Location Service.

Package: liblomiri-location-service-dev
.
463184a
Package: llvm-libunwind1
Description-md5: eb120532210ba0a1aa18eb3464ed08dc
Description-en: LLVM unwinder, not compatible with glibc
 llvm-libunwind is the LLVM unwinder, with platform support for DWARF
 unwind info, SjLj, and ARM EHABI. Using it for packaging work inside
 Debian is not recommended, incompatible with glibc.
 .
 The low level libunwind API was designed to work either in-process (aka local)
 or to operate on another process (aka remote), but only the local path has
 been implemented. Remote unwinding remains as future work.

.
463031a
Package: libomp5
Description-md5: e28f50eb4beb8e316b69da2c1c0194c3
Description-en: LLVM OpenMP runtime
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.

.
462757a
Package: libc++abi1
Description-md5: 6a197f8a8ae8385e801b369ea97886ce
Description-en: LLVM low level support for a standard C++ library
 libc++abi is another implementation of low level support for a standard C++
 library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Provide a portable sublayer to ease the porting of libc++

.
462733a
Package: libc++1
Description-md5: 3e11b80d657dd5ed05ee027e3cba65ca
Description-en: LLVM C++ Standard library
 libc++ is another implementation of the C++ standard library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Fast execution.
   * Minimal memory use.
   * Fast compile times.
   * ABI compatibility with gcc's libstdc++ for some low-level features such
     as exception objects, rtti and memory allocation.
   * Extensive unit tests.

.
462559,462569d
462399,462405d
462114,462124d
462075,462089d
359233c
 This library provides support for the Pulse-Eight USB-CEC adapter and
 other CEC capable hardware, like the Raspberry Pi.
.
359231c
Description-md5: bafb88d25dcce1ce9649821437194476
.
359229a
Package: libcec8
Description-md5: 8fa24da000d1436d85e6a210d9640157
Description-en: USB CEC Adaptor communication Library (shared library)
 This library provides support for the Pulse-Eight USB-CEC adapter and
 other CEC capable hardware, like the Raspberry Pi.
 .
 This package provides the shared library.

Package: librust-libcec-dev
Description-md5: 821252148ea52be8e6fa05ce6bda7ec8
Description-en: Rust bindings for libCEC
 This library provides support for the Pulse-Eight USB-CEC adapter and
 other CEC capable hardware, like the Raspberry Pi.
 .
 This package provides the Rust binding for libCEC, which wraps its C
 API and links the shared library. As is usual, this package contains
 the crate source.

Package: node-libcec
Description-md5: 8c1b813a320216dea4f47d95066472ef
Description-en: Node.js bindings for libCEC
 This library provides support for the Pulse-Eight USB-CEC adapter and
 other CEC capable hardware, like the Raspberry Pi.
 .
 This package provides a native Node.js (N-API) addon that binds libCEC
 over its C API, exposing an EventEmitter-based CecAdapter to JavaScript.

.
314944,314962d
234296,234302d
219607,219611d
214193,214202d
214166,214185d
118597,118602d
93539a
Package: dracut-core
Description-md5: d055d51e8c4034927ecc0f5de64c62ff
Description-en: dracut is an event driven initramfs infrastructure (core tools)
 Unlike existing initramfs's, this is an attempt at having as little as
 possible hard-coded into the initramfs as possible.  The initramfs has
 (basically) one purpose in life -- getting the rootfs mounted so that
 it can transition to the real rootfs.  This is all driven off of
 device availability.  Therefore, instead of scripts hard-coded to do
 various things, it depends on udev to create device nodes and
 to detect the rootfs.
 Having the root on MD, LVM2, LUKS is supported as well as NFS, iSCSI,
 NBD and FCOE with dracut-network.
 .
 These Dracut modules need suggested packages:
  * crypt: cryptsetup or systemd-cryptsetup
  * dm: dmsetup
  * dmraid: kpartx
  * dmsquash-live: isomd5sum (optionally)
  * dmsquash-live-autooverlay: parted
  * dracut-systemd: systemd-cryptsetup (when crypt and systemd are used)
  * lvm: lvm2
  * lvmmerge: lvm2
  * lvmthinpool-monitor: lvm2
  * mdraid: mdadm
  * multipath: kpartx
  * squash-squashfs: squashfs-tools
  * systemd-cryptsetup: systemd-cryptsetup
  * systemd-pcrextend: systemd-tpm

.
36071,36214d
